Explora-Dome.com
Explora-Dome.com
Pricing | Explora Dome I | Events | Specials | Forums | Photos | Dealers | Instructions | Media | Contact | Visit | HOME
     
 
Call us toll free at 800-328-7659
for more information on the Explorer Dome II call or
email us!

 

10 x 10-foot Square Explora Dome

unpack the parts When you unpack the parts you have 4 long tubes and 15 shorter tubes you would then assemble them as shown in the photos below. You will need 4 for the corners and 2 for the door opening and then 9 for the other 3 walls
fasten the 4 corner tubes in place Then you lay out the 4 longer tubes in a square and fasten the 4 corner tubes in place, then the wall tubes then the 2 door frame tubes as pictured below .You do have a choice as to where in the wall you place the door center left of center or right of center.
fasten the 4 corner tubes in place
Now you lay out the roof supports to form a square and then assemble them as seen below.
lay out the roof supports
Once you have the roof support bolted together you would place it on top the wall tubes and fasten in place. The wood is there to support and fasten the roof panels to.When you are done it should look like the bottom picture
fasten the roof panels
Now you are ready to install the siding and mount the mounting ring on top the roof support
install the siding
install the siding
Now you are ready to install the roof panels
install the roof panel
10 x 10-foot Square Explora Dome

 

Top Of Page

 
     
     
     
     
     
 
 
     
You are visitor 373727